Back to category

Avex® multi-grip non-structural blind rivet 1/8 grip 0.125 - 0.312 aluminum / steel large flange head

01641-00414V
Avex® multi-grip non-structural blind rivet 1/8 grip 0.125 - 0.312 aluminum / steel large flange head

Features

  • Multi-grip capability accommodates wide variations in material thickness
  • One fastener can be used to replace several standard grip fasteners thus reduced fastener inventory and simpler stock control
  • Good hole fill provides strong vibration resistant joints
  • Compensates for irregular, oversized, slotted or misaligned holes
  • Retained stem avoids damage, electrical problems or rattling caused by loose stems
  • Provides a large blind side bearing area and spreads the tail bearing load/clamp load on the rear sheet
  • Can stop sheet movement in non-standard holes

Technical Information

Nominal Size
1/8
Grip Range
0.125 in - 0.312 in (3.2 mm - 7.9 mm)
Rivet Length
0.530 in (13.5 mm)
Stem Material
Zinc plated steel
Body Material
Aluminum
Series
01641
Rivet Type
Original Avex® multi-grip blind rivet
Head Type
Large flange
Shear Strength
165 lbf (0.73 kN)
Tensile Strength
230 lbf (1.02 kN)
Head Width
0.337 in (8.6 mm)
Drill Size
9/64 in