Back to category

Avex® multi-grip non-structural blind rivet 3/16 grip 0.500 - 0.781 aluminum / steel large flange head

01641-00631-100
Avex® multi-grip non-structural blind rivet 3/16 grip 0.500 - 0.781 aluminum / steel large flange head

Features

  • Multi-grip capability accommodates wide variations in material thickness
  • One fastener can be used to replace several standard grip fasteners thus reduced fastener inventory and simpler stock control
  • Good hole fill provides strong vibration resistant joints
  • Compensates for irregular, oversized, slotted or misaligned holes
  • Retained stem avoids damage, electrical problems or rattling caused by loose stems
  • Provides a large blind side bearing area and spreads the tail bearing load/clamp load on the rear sheet
  • Can stop sheet movement in non-standard holes

Technical Information

Nominal Size
3/16
Grip Range
0.500 in - 0.781 in (12.7 mm - 19.8 mm)
Rivet Length
1.110 in (28.2 mm)
Stem Material
Zinc plated steel
Body Material
Aluminum
Series
01641
Rivet Type
Original Avex® multi-grip blind rivet
Head Type
Large flange
Shear Strength
320 lbf (1.42 kN)
Tensile Strength
472 lbf (2.10 kN)
Head Width
0.635 in (16.2 mm)
Drill Size
13/64 in