POWERSTUD GALV HD5 1/2X5 1/2

The Power-Stud® HD5 Anchor is a fully threaded, torque controlled, wedge expansion Anchor. Suitable base materials include normal-weight concrete, sand-lightweight concrete and grouted concrete masonry. The Anchor is manufactured with a hot-dip galvanized carbon steel body and stainless steel expansion clip. Nut and washer are included.

Downloadable Documents :

• Specification Sheet
• Catalog

Features

• Consistent performance in high and low strength concrete
• Anchor can be installed through standard fixture holes
• Nominal drill bit diameter same as Anchor diameter
• Length ID code and identifying marking stamped on head of each Anchor
• Ultimate load capacity: 2690 lb tensile strength when embedded in 2500 psi, 2950 lb tensile strength when embedded in 3000 psi, 3405 lb tensile strength when embedded in 4000 psi, 4170 lb tensile strength when embedded in 6000 psi and 4815 lb tensile strength when embedded in 8000 psi compressive strength concrete
• Ultimate load capacity - 1670 lb 4 in minimum edge distance and 1860 lb 12 in minimum edge distance compressive strength concrete in grout-filled concrete masonry