POWERSTUD GALV HD5 3/4X5-1/2

The Power-Stud® HD5 Anchor is a fully threaded, torque controlled, wedge expansion Anchor. Suitable base materials include normal-weight concrete, sand-lightweight concrete and grouted concrete masonry. The Anchor is manufactured with a hot-dip galvanized carbon steel body and stainless steel expansion clip. Nut and washer are included.

Downloadable Documents :

• Specification Sheet
• Catalog

Features

• Consistent performance in high and low strength concrete
• Anchor can be installed through standard fixture holes
• Nominal drill bit diameter same as Anchor diameter
• Length ID code and identifying marking stamped on head of each Anchor
• Ultimate load capacity: 7080 lb tensile strength when embedded in 2500 psi, 7750 lb tensile strength when embedded in 3000 psi, 8955 lb tensile strength when embedded in 4000 psi, 12125 lb tensile strength when embedded in 6000 psi and 14000 lb tensile strength when embedded in 8000 psi compressive strength concrete
• Ultimate load capacity - 5660 lb 4 in minimum edge distance and 5660 lb 12 in minimum edge distance compressive strength concrete in grout-filled concrete masonry